Air Accessories
-
Coming soon
#2615 - 3/8" Filter/Regulator with Gauge
• Prevents costly damage to air tools caused by rust scale and moisture
• Convenient minimum installation time into your compressed air system
• Efficiently traps moisture while passing through clean dry compressed air
• Gauge has rugged polycarbonate case with 2"" face
• 1/4" or 3/8" NPT with Max 135psi
• Air flow unit 1350L/min (approximately 47.655cfm)
• 9-2/5" (L) x 2-2/5" (W)
• Weight: 2.40lbs.
Click Here to Download: Parts Breakdown- NT$0/SET
-
Coming soon
#2616 - 3/8" Filter, Regulator & Lubricator with Gauge
• Prevents costly damage to air tools caused by rust scale and moisture
• Convenient minimum installation time into your compressed air system
• Provides clean dry regulated compressed air over a wide range of airflows with accurate control and fast response
• Efficiently traps moisture while passing through clean dry compressed air
• Gauge has rugged polycarbonate case with 2" face
• 1/4" or 3/8" NPT with Max 160psi
• Air flow unit 1350L/min (approximately 47.655cfm)
• 5m Micron filter
• 9-2/5" (L) x 2-2/5" (W)
• Weight: 2.40lbs.
Click Here to Download: Parts Breakdown- NT$0/SET
-
Coming soon
#3000 - End Line Oiler
• Automatically lubricates air tool during use
• Oil reservoir is fabricated of high impact plastic
• Always visible oil supply and oiling action
• Holds three to four days supply of oil
• For all 3/8″ and 1/2″ air impact, body shop air tools, and pneumatic hammers- NT$0/PCS
-
Coming soon
#5706 - Brass Air Regulator
• Increases or decreases air pressure as desired
• Air Inlet NPT: 1/4"
• Air Outlet NPT: 1/4"
• PSI: 90-140PSI- NT$0/PCS
-
Coming soon
#3SB10 - 3 Way Air Swivel
• 3 way swivel action for tangle-free operations of air hose with all air tools
• Easy to install
• Standard 1/4" male and female fittings Capacity: 160psi Overall Length: 2" (50mm) Net Weight: 0.08kg Air Inlet NPT: 1/4" Air Outlet NPT: 1/4"- NT$0/PCS
-
Coming soon
#NEW 3SB40 - Air Tools Air accessories High Flow 3 Way Air Swivel
- 1.5X the body size of normal 3-way swivels
- ported out for 2X the air passageway size
- Enjoy more power and RPM compared to even traditional 45° swivels but with 360° of freedom
- NT$0/PCS
-
Coming soon
#2640 - Universal Quick Coupler with Safety Lock, Air Regulator and Pressure Release (Internal parts made of metal)
• Quick universal coupler can be used with most US and European couplers.
• Safety lock reduces the risk of possible injury or damage due to accidental air line disconnect.
• Once the coupler is engaged, turn the regulator ring to lock and regulate the air flow.
• Built-in Air flow regulator opens up to 85cfm of air
• Pressure release which eases connecting and disconnecting air tools
• No whiplash when disconnecting tools- NT$0/PCS
-
Coming soon
#4546 - 6″ Nylon Bed Brush
• Special design helps prevent clogging and loading
• Constructed of non-oxidizing materials which will not react with metal
• Non-sparking material creates a safer brush than conventional wire brushes
• Lasts up to 6 times longer than conventional wire brushes under normal circumstances
• Unit has standard 5/8″ thread
• Maximum 6500rpm- NT$0/PCS
-
Coming soon
#FSB3000-C - Spring Balancer 1.5-3.0KG
• Fast and Convenient installation
• Anti-falling steel wire mounting holes.
• Housing is made of rustproof iron shell
• Rotary adjusting cover for easier tension adjustment.- NT$0/PCS
-
Coming soon
#FSB5000-C - Spring Balancer 3.0-5.0KG
• Fast and Convenient installation
• Anti-falling steel wire mounting holes.
• Housing is made of rustproof iron shell
• Rotary adjusting cover for easier tension adjustment.- NT$0/PCS
-
Coming soon
#78204 - 1/2″ Drive 1/2 Size Thin Wall Lug Nut Socket Set – 17.5 – 22.5mm
• ½ size thin wall impact rated sockets for damaged, swollen and stuck lug nuts
• In ½ mm size, 17.5, 19.5, 21.5 and 22.5mm
• Finally available in thin wall for use on tight access space limited lug nuts and wheel designs- NT$0/SET
-
Coming soon
NEW #78311 - 11-Piece – 3/8″ Drive 1/2 Size Socket Set – 9.5 – 19.5mm
• Ever grab a 13mm socket and it’s too tight, but 14mm feels lose? And it’s not SAE?
• Not every bolt and nut on vehicles remain factory perfect to the millimeter over time and service life
• Use 0.5mm under sockets for rounded and damaged bolts and nuts, use 0.5mm over for swollen or corroded bolts and cap covered nuts
• For hand tools and impact wrenches, use a hammer to fit 1/2 size under sockets where needed- NT$0/SET
-
Coming soon
#78250 - 1/2″ Drive 12-Point Pinless Heavy-Duty Driveline Impact Socket Set
• 12-point for use on driveline bolt heads for everything from domestic and import to heavy-duty applications
• Astro’s “torque-saver” extension design transmits more of your impact wrench to the fastener head allowing you to use smaller class impacts
• Includes common driveline sizes 1/2″, 3/8″ 12, 13 & 18mm with a pinless design that allows a full 360° of freedom for the universal head to angle and rotate- NT$0/SET
-
Coming soon
#78315 - 3/8″ Drive 10-24mm Pinless Universal Impact Sockets – No Skips – 15 Pieces
• Astro’s “Anti-Floppy” pinless design doesn’t go loose and allows a full 360° of freedom
• Sizes both forged into the socket and dual laser marked in large text for easy selection
• Non-skip 10-24mm 3/8″ drive set for modern powerful 3/8″ impacts
• Forged CRO-MO with simple lifetime warranty process- NT$0/SET
-
Coming soon
NEW #78244M - 11-Piece 1/2″ Drive Mid-Length Pinless Universal Impact Sockets – Metric
• Durable CRO-MO pinless design allows a full 360° of freedom for the universal head to angle and rotate
• 6-point ½” drive universal impact sockets with a deeper hex and inner socket depth but mid-size overall length
• Multiple laser and permanent stamped size marking for easy grab and go socket selection
• Includes mid-length pinless universal impact sockets in the following sizes: 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm- NT$0/SET
-
Coming soon
NEW #78214 - 14PC 1/2" Drive 17-30mm Low Profile Nano Impact Socket Set- No Skips
• No skipped sizes from 17mm to 30mm in 1/2" drive Nano sockets with 22mm outside hex
• Also pairs with 78218 18" long ratcheting wrench- NT$0/SET
-
Coming soon
NEW #78305 - 5PCS 3/8"dr Adapter Set
• Includes square drive adapters in 1/4", 3/8" & 1/2", wobble 3/8" and 1/4" hex bit collet
• Drive multiple ways: 3/8" square drive, or using the 17mm outside hex from the side with open end wrenches or retained in Astro 783105 & 78318 ratcheting wrench- NT$0/SET
-
Coming soon
NEW #78313 - 13-Piece 1/4″ & 3/8″ Drive External Torx Nano Impact Socket Set
• Low profile E-Torx impact sockets in 1/4″ drive E4-E8 and 3/8″ drive E10-E24
• All sockets feature an outside hex for extreme low-profile access from the side with a wrench
• Forged CRO-MO- NT$0/SET
-
Coming soon
NEW #78105 - 1/4" Nano Drive Size Adapter Set
• Includes square drive adapters in 1/4", 3/8" & 1/2", wobble 1/4" and 1/4" hex bit collet
• Drive multiple ways: 1/4" square drive, or using the 11mm outside hex from the side with open end wrenches or retained in Astro 78345 ratcheting wrench- NT$0/SET
-
Coming soon
NEW #78113 - 13-Piece 1/4″ Drive Low Profile Nano Impact Sockets – Metric
• At less than 3/4” long (18.5mm), sockets are 20% shorter than shallow impact sockets
• All sockets feature a 11mm outside hex for increased access when used with a wrench
• Includes: 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm & 15mm
• 1/4″ drive for 1/4″ ratchet or 1/4″ impact use
• Forged CRO-MO with lifetime warranty- NT$0/SET